Growth drives upgrades to YEC system

What does into planning upgrades to an electrical system? For York Electric Cooperative, the main answer is growth. Over the last decade, communities served by York Electric have been some of the fastest-growing in the nation, according to the U.S. Census Bureau.

Craig Spencer on site.
[/media-credit] York Electric’s Craig Spencer monitors readings at the new Van Wyck Substation, which serves one of the cooperative’s fastest growing areas.

Craig Spencer, the cooperative’s vice president of engineering, says he has seen YEC’s membership — now more than 60,000 and counting — triple during his 28-year tenure. Spencer and the engineering and operations teams at York Electric have taken on numerous new projects over the last few years.

York Electric’s Craig Spencer monitors readings at the new Van Wyck Substation, which serves one of the cooperative’s fastest growing areas.[/caption]

“If we didn’t have the growth, a lot of the projects wouldn’t be necessary,” Spencer says. “You’ve got to upgrade your lines and your system to meet the growth.”

Determining where those upgrades are needed is a sophisticated formula that factors not only population projections but also energy load data. Engineers and advisors create a three- to four-year work plan based on increasing — and decreasing — usage across York Electric’s system.

YEC's Zack Smith on site.
[/media-credit] YEC substation specialist Zack Smith monitors the controls inside the Van Wyck Substation to make sure things are working properly. Substations have many hazards because of the large amount of electricity flowing through one centralized location. Maintaining the equipment not only helps to prevent outages, but also ensures safe service for members.

“By looking at how past loads have grown over time with new members, new subdivisions and new commercial projects, we kind of know what’s coming,” Spencer explains. “We know that areas like Lake Wylie, Fort Mill and Lancaster County are growing at a faster rate than the western part of our service territory.”

As loads increase and change, so must the delivery system. The substations and circuits that reliably provided electricity 20 years ago might now be overburdened, compromising reliability for members on those lines.

“We try to see what areas are stressed or are going to be stressed,” says Spencer. “You want to have a conductor there that will carry more than what is needed, even during extreme temperatures.”

Plans also must factor where the load centers are located. York Electric wants its substations, the facilities that connect distribution lines to transmission sources, to be near where power is being used. As areas grow and the existing substations serving those areas become loaded, new substations are built to serve the increased loads and provide capacity for new growth, resulting in better reliability for everyone.

“You are shortening the amount of line between the member and the source, which reduces the likelihood of having power interruptions because of trees falling or a car hitting a pole,” Spencer says. “If there is an outage, it still may take the same amount of time to fix the problem, but you can find it faster and you don’t have as many members affected.”

YEC crews in bucket trucks working on lines.
[/media-credit] To minimize service interruptions for members, upgrade work—like the transition to new poles at the Seven Oaks substation—is completed while the line is energized. Crews meticulously discuss the job and safety precautions in detail before beginning the work.

Spencer says that improving circuits — the network of lines through which electricity flows — has a similar effect. Adding circuits to existing substations splits the load so that not as many people lose service in an outage. Technological advances also make the system more reliable. In many cases, the cooperative can communicate with its equipment. Trouble areas are located quicker, sometimes before an outage occurs.

Fortunately, York Electric has been able to make these investments without raising rates.

“The growth helps spread the costs among more members and more energy sales,” Spencer says. “Under the leadership of our board of directors and management team, we try to make wise decisions to maintain and modify the electrical system to handle the growth and provide reliable service to our members. That helps minimize what has to be recovered from the membership.”

And helps the cooperative get ready for more members to come online.

YEC’s system upgrade breakdown

Gloved crew member's hands holding wires of various sizes.
[/media-credit] Line conversions—such those done on Haney Road, Highway 49 and Grey Rock Road—replace the smaller conductors with the 336 wire (far left), allowing for greater capacity and durability.

York Electric has made major upgrades to our system in the last few years, keeping pace with growth occurring in our communities and assuring reliability for all our membership. The following is a breakdown of those upgrades and the areas that benefit.

Lakeview Substation

Serves: Fort Mill area between I-77 and Lancaster Co. line.

Upgrade: Added second power transformer, doubling capacity. Added circuits, allowing for the ability to split electrical loads and increase reliability.

India Hook Substation

Serves: Southern side of Lake Wylie between Highway 274 and India Hook Rd.

Upgrade: Rebuilt one of the original cooperative substations, replacing old equipment with more state-of-the art technology and increasing capacity.

Van Wyck Substation

Serves: Catawba Reservation area and portions of Lancaster Co. to the state line.

Upgrade: Another original substation rebuilt, increasing station capacity and the physical size of the station to allow for future additional circuits. Expanded and upgraded circuits from Indian Land High School, across Highway 521 along Collins Rd.

Banks Street Substation, circuits 1 and 2

Serves: Waterside and Mason’s Bend communities, Catawba Ridge High School and Nation Ford Chemical.

Upgrade: Increased capacity in this area by taking a delivery from an existing Duke station. This arrangement was more cost effective than building our own substation in this area. Constructed a double circuit to serve the growing membership and increase reliability to one of our large industrial members— Nation Ford Chemical.

Seven Oaks Substation

Serves: North of the Five Points area around the Lake Wylie community.

Upgrade: Addition of circuit 5 allows the co-op to accommodate for high growth in the area around Crowders Creek Elementary School and reduce load on its Catawba substation. The addition of circuit 1 will split the load along Highway 274 northwest of Pole Branch Rd. to increase capacity and increase reliability.

Haney Road line conversion

Serves: Haney Rd. and portions of the Hands Mill subdivision.

Upgrade: Converted a single-phase line to a three-phase line, increasing the conductor size to increase capacity, split the load and increase reliability.

Jim McCarter Rd. Recloser

Serves: Between Clover and York along Jim McCarter, Tom Joye and Burrell Roads.

Upgrade: Installed an electronic recloser which requires less maintenance and incorporates smart controls that can identify and isolate outages downline.

YEC Crew member inspection substation structure.
[/media-credit] New steel structures were brought in to rebuild the Van Wyck Substation in Lancaster. The high side connection point is where electricity from the generation source is delivered to the substation by transmission lines. In the substation, large transformers decrease the voltage to safely distribute to members.

Aycock School Substation

Serves: Southwestern York County around the McConnells area.

Upgrade: A new substation is underway along with a new transmission line. The addition of this substation will greatly increase reliability to members in this area. Construction should be complete by summer 2021.

Gray Rock Road conversion

Serves: Portion of Baxter and Lake Ridge communities.

Upgrade: Increased the conductor size to allow for more capacity, more efficient operation and increased operational flexibility.

Hwy. 49 conversion

Serves: Members along Charlotte Highway Shiloh Farms and Hunter Park communities.

Upgrade: Increased the conductor size for more capacity and more efficient operation.

York Electric Cooperative System Improvement Map
Clicking on the map graphic above will open a larger version in the same browser window.